Adhesive Mortar
Back Adhesive Mortar Thin-bed mortar for Autoclaved Aerated Concrete (AAC) Masonry. Get a FREE Quote Resources Data Sheet Material Safety Adhesive Mortar APPLICATIONSTo install autoclaved aerated concrete block walls, sheets,or panels.It can also be used to repair and resurfaceADVANTAGES 1hr of fire resistance per inch in thickness,complementing AAC’s. Specially formulated for panels or blocks, therefore itcomplies with stated technical specifications. Excellent bonding in autoclaved aerated concreteblocks, sheets, and panels. Up to 10 minute* correction time allowing to alignpieces during wall construction. There is no detachment nor joint chalking. Free of crackings or hairline crackings. Compression strength of at least 2133 Psi (14.7 Mpa). It can also be used as patch for autoclaved aeratedconcrete blocks, panels, and sheets. *It depends on the type of application and environmentalconditions. WEIGHT 55 lbs.
Confined Masonry Block
Back Confined Masonry Block Solid, lightweight modular block, confined with concrete columns and beams. Get a FREE Quote Resources Data Sheet Material Safety Confined Masonry Block ADVANTAGES 60% lighter than CMU Block. Large dimension block. Faster installation compared to CMU Block. High quality and smooth finish. APPLICATION Load bearing and structural walls. WEIGHT 12 lbs/ft2 for 4’’ thick blocks.
Reinforced Block
Back Reinforced Block Cored blocks with internal reinforcement made of rebar and concrete for load bearing walls. Get a FREE Quote Resources Data Sheet Material Safety Reinforced Block ADVANTAGES Does not require additional structural support, no need of beams and columns. Savings of 50% in rebar and concrete compared with CMU Block. APPLICATION Load bearing, partition and exterior walls. WEIGHT 15 lbs/ft2 for 5” thick blocks without rebar or concrete.
Partition Panel
Back Partition Panel Steel reinforced demising wall panel. Single panel from floor to ceiling. Get a FREE Quote Resources Data Sheet Material Safety Partition Panel ADVANTAGES Fastest and most efficient installation on the market. Supports direct attachment of heavy loads (TV, cabinets, etc.). Solid partition wall, resistant to structural movements, will not drift or deflect. Does not require additional reinforcement. APPLICATION Non-load bearing partition walls up to 12’. WEIGHT 10.7 lbs/ft2 for 4’’ thick panels.
Industrial Panel
Back Industrial Panel Steel reinforced panel for industrial walls and fences. Get a FREE Quote Resources Data Sheet Material Safety Industrial Panel ADVANTAGES Fast Installation. Some applications may not require adhesive. Thermal, acoustic and fire resistant characteristics, result in a comfortable, safe and productive work space. APPLICATION Industrial warehouses and fences. Panels can be attached directly over steel frames, concrete or structural members. WEIGHT 12.3 lbs/ft2 for 4’’ thick panels.
Subfloor Slab
Back Subfloor Slab Steel reinforced subfloor slab. Designed to be placed over steel supports at greater separation. Get a FREE Quote Resources Data Sheet Material Safety Subfloor Slab Steel reinforced subfloor slab. Designed to be placed over steel supports at greater separation. ADVANTAGES Fast Installation. Reduces structural costs due to light weight. Requires less framing (allows for more separation between supports). Eliminates on-site casting for sturdy subfloors. APPLICATION Subfloors. Panels can be attached directly over steel frames, concrete or confined masonry walls. WEIGHT 12.3 lbs/ft2 for 4’’ thick panels.
Floor Panel
Back Subfloor Panel Steel reinforced subfloor panel to accommodate supports at 16″ and 24″ O.C. Get a FREE Quote Resources Installation Guide Data Sheet Standard sizes 2″x2’x8′ & 3″x2’x8′ Subfloor Panel ADVANTAGES Fast installation. Non labor intensive: no sanding needed to level subfloor. Fire resistant material. Highly acoustic. Any type of flooring can be applied directly. APPLICATION Floor panels are directly fastened over wood or steel joists. No need for plywood. WEIGHT 5.51 lbs/ft2 for 2’’ thick panels. 8.27 lbs/ft2 for 3’’ thick panels. LITECON SUBFLOOR PANEL VS Others LITECON SUBFLOOR PANEL SELF – LEVEL CONCRETE LITECON SUBFLOOR PANEL EXPERIENCE ‘EFFORTLESS’ FLOOR INSTALLATION Higher Quality – Faster Installation – Lower Cost SUBFLOOR PANEL SELF-LEVEL CONCRETE FeaturesSystems SUBFLOOR PANEL SELF-LEVEL CONCRETE Highly Acoustic Ready for Direct Finish Quick and Easy Installation Fire Resistant Material No Joint Sanding Required No OSB-Subfloor Needed No Self-Level Concrete Needed No Hardie Backer Needed
Firewall Panel
Back Firewall Panel Specially crafted AAC 2”-3” Panel for Firewalls. Get a FREE Quote Resources Installation Guide Data Sheet Material Safety Standard sizes 2″-3″ thick by 2’x4′ to 2’x10′ Firewall Panel ADVANTAGES Fast Installation during framing, no need for specialized labor. Complies with a 2 hour fire rating. Highly acoustic, reduces 58 STC. APPLICATION Sound absorbing 2 hour Firewalls, Shaftwalls, Area Separation Walls, Demising Walls, Party Walls. WEIGHT 5,12 lbs – 7,68 lbs/ft2 LITECON Firewall Panel VS Others LITECON – FIREWALL SHAFTLINER SYSTEM LITECON FIREWALL UNRIVALED FIRE RESISTANCE Higher Quality – Faster Installation – Lower Cost FIREWALL SHAFTLINER FeaturesSystems FIREWALL SHAFTLINER Superior Sound Insulation Cost-Efficient Quick and Easy Installation No H-Studs Required No C-Tracks Necessary Zero Shortages No Specialized Labor Needed
Sheathing/Cladding Panel
Back Sheathing/Cladding Panel 2 in 1: Sheathing and Cladding Panels for traditional wood or steel frames. Ideal replacement for plywood/osb, 3-coat stucco or EIFS Get a FREE Quote Resources Installation Guide Data Sheet Standard sizes 2″ thick by 2’x4′, 2’x80″ & 2’x8′. Steel reinforced with an 1/8” steel mesh 2 in 1: Sheathing/Cladding Panel ADVANTAGES R-Value: 2.4 Continuous Insulation (vs Stucco 0.2 and Fiber cement siding 0.3). 1 Hr. Fire Rated. Fast installation (700 ft2 a day per 2-3 person crew). Any finish can be applied: Stucco finish, plaster, veneer, sticky brick, brick, stone, siding. Litecon Panels have a super smooth finish, allowing for top coat savings. A Stucco Solution: does not sag, warp, deform or crack (joints remain invisible over time). An ideal substrate for stucco finish with no cracks (FINALLY!). Water, Mold, Mildew Resistant. APPLICATION Litecon Cladding Panel is the sheathing and exterior wall. To install, directly fasten to wood or steel frames. WEIGHT 5.12 lbs/ft2. LITECON Sheathing/Cladding Panel VS Others LITECON – CLADDING 3-COAT STUCCO EIFS LITECON SHEATHING/CLADDING THE BEST FOR EXTERIOR WALLS Higher Quality – Faster Installation – Lower Cost CLADDING 3-COAT STUCCO EIFS FeaturesSystems CLADDING 3-COAT STUCCO EIFS Thermal Insulation Fire Resistance Acoustic Insulation Fast Installation Durability Water & Mold Resistance Cost-Effectiveness Design Flexibility Energy Saving
Hello world!
Welcome to WordPress. This is your first post. Edit or delete it, then start writing!